DIY : Customized Name Hangers
Hello,
Wrapped In It DIY tutorials here, hope you enjoy.
 This will take some practice so buy much more wire than you need.

Here’s what you need:

1. 20 gauge galvanized wire (ask your electrician or check your hardware store)
2. Wire cutters
3. Needle nose pliers (cover the metal noses with masking tape to prevent marking up your wire)
4. Wooden hangers (without the pant bar on the bottom)
5. Drill with drill bit(or get your carpenter to drill) about the size of your wire.
6. Super strong glue
7. Pen and paper

Here’s how it’s done:

Print out or draw the name in the font you like then place it on a piece of wood, pick points in each letter where the wire needs to curve or turn and place a finishing nail there and hammer it in. Then take the wire and quickly wrap it around the template of nails and "write" the name !!


Good luck Doing It Yourself! And make sure you wrap it beautifully! take pictures of your work and send to our email wrapped_init@yahoo.com and feel free to comment if you need any help